Removing The Backup Drive Filler Cover - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

12.3.1.3 Removing the backup drive filler cover

Figure 159: Removing the backup drive filler cover
Ê Hold the backup drive filler cover by its two handle recesses (1) und pull it
out of the installation bay (2).
V
CAUTION!
Save the backup drive filler cover for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
TX120 S3
Upgrade and Maintenance Manual
Accessible drives
281