Removing The Front Panel Module - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the server as described in section
page 58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.
Ê Open the front cage as described in section
page 66.

13.1.3 Removing the front panel module

Figure 168: Disconnecting front panel cable
Ê Disconnect the front panel cable from the system board.
TX120 S3
50.
Upgrade and Maintenance Manual
Front panel and LAN connector
80.
"Locating the defective
"Shutting down the server" on
"Opening the server" on
"Opening the front cage" on
"Disabling
295