Removing The Optical Disk Drive Filler Cover - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Accessible drives

12.2.1.3 Removing the optical disk drive filler cover

Figure 146: Removing the ODD filler cover
Ê Using a slotted screw driver, pry the ODD filler cover out of its bay and
remove it from its installation bay.
V
CAUTION!
Save the ODD filler cover for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
266 Upgrade and Maintenance Manual
TX120 S3