Installing A 3.5-Inch Hdd Module; Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.3.4.4

Installing a 3.5-inch HDD module

Ê Install the replacement HDD module into the empty drive bay as described
in section "Installing a 3.5-inch HDD module" on page
7.3.4.5

Concluding steps

Perform the following procedures to complete the task:
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
Ê Close the front cage as described in section
page 68.
Ê Cose the server cover as described in section
on page 72.
142
104.
Upgrade and Maintenance Manual
132.
"Performing a RAID
"Closing the front cage" on
"Mounting the server cover"
TX120 S3