Installing Memory Modules; Required Tools; Preliminary Steps; Installing A Memory Module - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Main memory
10.2

Installing memory modules

Upgrade and Repair Units (URU)
Average task duration: 5 minutes

10.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing memory modules: tool-less
●

10.2.2 Preliminary steps

Before installing a memory module, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.

10.2.3 Installing a memory module

Ê Identify the correct memory slot according to the mounting order described
in section "Memory sequence" on page
236
79.
50.
58.
Upgrade and Maintenance Manual
"Disabling BitLocker
80.
"Locating the defective
"Shutting down the
"Opening the server" on
234.
"Disabling
TX120 S3