Accessible drives
12.2.3 Replacing an optical disk drive (ODD)
Field Replaceable Units (FRU)
Average task duration: 15 minutes
12.2.3.1 Required tools
Preliminary and concluding steps:
●
– Slotted screw driver (only for removing the optical disk ddrive filler cover
Installing accessible drives: tool-less
●
12.2.3.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove optical disk media from the drive.
Ê Shut down the server as described in section
page
58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
12.2.3.3 Replacing the optical disk drive
Ê Remove the defective ODD as described in section
disk drive (ODD)" on page
278
79.
273.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Shutting down the server" on
"Opening the server" on
"Removing an optical
TX120 S3