Opening The Server - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

4.3

Opening the server

V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX120 S3 server must not run while the side cover is
removed.
For further safety information, please refer to chapter
●
information" on page
Ê Shut down and power off the server as described in section
the server" on page
Ê Unlatch and remove the power cord from the power supply units as
described in section
Ê Remove all external cables from the rear connector panel and expansion
cards. For further information, refer to section
on page 427.
TX120 S3
37.
58.
"Disconnecting power cords" on page
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
"Shutting down
59.
"Connectors and indicators"
61