Removing A Memory Module - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Main memory

10.3.3 Removing a memory module

Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Operation modes" on page
Figure 131: Removing memory modules
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
Ê Remove the ejected memory module.
240
235.
Upgrade and Maintenance Manual
234.
TX120 S3