Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 38: Inserting the 2.5-inch HDD / SSD module
Ê Insert the HDD module into a drive bay and carefully push back as far as it
will go (1).
Ê Close the locking lever to lock the hard disk drive in place (2).
7.2.2.5

Concluding steps

Perform the following procedures to complete the task:
Ê Install the hard disk drive cover as described in section
cover" on page
124
71.
Upgrade and Maintenance Manual
"Mounting the drive
TX120 S3