Removing The Fbu From The Chassis; Removing The Fbu From The Fbu Holder - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Remove the server cover as described in section
page 61.
Ê Open the front cage as described in section
page 66.
9.3.6.3

Removing the FBU from the chassis

Ê Remove the FBU from the chassis as described in section
FBU" on page
9.3.6.4

Removing the FBU from the FBU holder

Figure 105: Disconnecting the FBU adapter cable from the FBU
Ê Press down on the locking latch on the FBU cable (see close-up) and
disconnect the FBU adapter cable.
212
205.
Upgrade and Maintenance Manual
"Opening the server" on
"Opening the front cage" on
"Removing an
TX120 S3