Installing The Cmos Battery - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

14.1.4 Installing the CMOS battery

Figure 187: Replacing the CMOS battery
Ê At a slight angle, fit the new CMOS battery into its socket as shown (1).
V
CAUTION!
Ensure to insert the CMOS battery with the positive pole (label side)
facing up as shown (see circle).
Ê Fold down the CMOS battery (2) until it locks in place.
Ê Ensure that the locking spring (3) is properly engaged.
TX120 S3
Upgrade and Maintenance Manual
System board and components
317