Pcb Panel Key/Pcb Subsw/Pcb Panel (Mfx-3595) - Muratec MFX-3595 Field Engineering Manual

PCB PANEL KEY/PCB SUBSW/PCB PANEL (MFX-3595)

1. Remove the Cover platen. (See "COVER PLATEN" on page 5-23.)
2. Remove the Cover top FBS. See "CIS" on page 5-27.)
3. Remove the PCB panel assy. (See "PCB PANEL ASSY (MFX-3595)" on page 5-30.)
4. Remove five screws [1], then remove the Cover PCB panel [2].
5. Remove four screws [3].
6. Remove the film harness [4], then remove the PCB PANEL KEY [5].
7. Remove two screws [6].
8. Disconnect the connector [8] directly connected to the PCB PANEL [7] and remove the PCB SUBSW [9].
9. Remove three screws [10].
10. Remove the film harness [11].
[ 1 ]
[ 3 ]
[ 3 ]
11. Remove two harnesses [12] [13] located on the backside of the PCB PANEL [7].
* The connector of film harness [12] has a lock. Hold down both sides of the connector to release lock.
12. Remove the PCB PANEL [7].
[ 1 ] [ 2 ]
[ 3 ]
[ 1 ]
[ 3 ]
[ 6 ]
[ 5 ]
[ 4 ]
[ 8 ]
[ 10 ]
[ 10 ]
[ 7 ]
5-31
[ 1 ]
[ 1 ]
[ 6 ]
[ 10 ]
[ 9 ]
[ 11 ]