Feed Roller Assembly - Muratec MFX-2500 Field Engineering Manual

5.2.16 Feed roller assembly

1. Remove the platen top cover. (See 5.2.9.)
2. Remove the ADF motor bracket. (See step 4 of 5.2.14.)
3. Remove the Feed pulley A, Gear 25 and Gear 30. (See step 5 to 7 of 5.2.14.)
4. Remove the Tx side cover. (See 5.2.10.)
5. Remove the Inner guide A assembly. (See 5.2.15)
6. Remove six screws and inner guide A.
Inner guide A
7. Remove the retard roller assembly. (See page 5-7.)
8. Remove E-ring and Feed roller assembly.
5-31