Panel Display (Liquid Crystal Display); Fax Standby Display - Muratec MFX-2500 Operating Instructions Manual

Hide thumbs Also See for MFX-2500:

Table of Contents

Panel display (Liquid Crystal Display)

The

shows the machine's status and messages you through operation.

LCD

Note: Make sure the machine is in the fax mode. If the machine is not in the fax mode, press

Select function keys.

You can select the following function in the fax standby mode. Also, these key indications will be changed according the function you are using.

• Redial – See page 1.11.

• Group – See page 2.7.

• Broadcast – See page 2.9.

Machine's status.

Fax reception mode.

Various items are displayed according to the operation.

When it is shown with double or more lines, it means that

you can select more items. Press

items.

Press

• Enlarge Tx – See page 2.20.

• Scan Size – See page 1.7.

• TTI – See page 1.7.

change to the fax mode.

FAX

Amount of memory available.

In this area, displays the operational status,

items and any messages.

to show the more

Press

• # of Pages – See page 2.21.

Getting started

1.3

Table of Contents