Inner Guide A Assembly - Muratec MFX-2500 Field Engineering Manual

5.2.15 Inner guide A assembly

1. Remove the platen top cover. (See 5.2.9.)
2. Remove the ADF motor bracket. (See step 4 of 5.2.14.)
3. Remove the Feed pulley A, Gear 25 and Gear 30. (See step 5 to 7 of 5.2.14.)
4. Remove the Tx side cover. (See 5.2.10.)
5. Remove one screw and Tx stopper.
6. Remove two screws and inner guide C. (See step 1 of 5.2.8.)
7. Remove the guide supporter A. (See step 2 of 5.2.8.)
8. Remove E-ring of feed roller.
9. Remove the Inner guide A assembly.
Inner guide A
E-ring
Tx stopper
5-30