Sorting Copy Setting; User Settings (For Copy Mode) - Muratec MFX-2500 Operating Instructions Manual

D. Sorting copy setting
Note: Default: Non-Sort
You can select sort function.
1
Press , [Copy Set].
MENU
2
Select "D.Sort setting" and then press [Enter].
3
Select desired function for default sort set-
ting.
4
Press [Enter] to save the default setting.
Note: Press to return to standby.
RESET
Note: If you set the sort function to ON, the Sort
icon will be appeared on the .
LCD
E. User settings (for copy mode)
You can change the default of following settings:
Scan settings. (Document type priority and Image density priority)
Width of the separator line in combine or image repeat function.
Auto reset time.
Scanning resolution priority. (You can select 600 dpi or 400 dpi)
To access the machine setting mode:
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select desired setting you want to change,
then press [Enter].
4
Change the settings as you want.
Default copy settings
3.3