Reset Igmp Group Port-Info - HP 3600 v2 Series Command Reference Manual

View
User view
Default level
2: System level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
all: Specifies all interfaces (the first all) or all IGMP groups (the second all).
interface interface-type interface-number: Specifies an interface by its type and number.
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
mask: Subnet mask of the multicast group address or multicast source address, 255.255.255.255 by
default.
mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast group address, this argument has an effective value range of 4 to 32. For a multicast source
address, this argument has an effective value range of 0 to 32. The system default is 32 in both cases.
Description
Use reset igmp group to remove dynamic IGMP group entries.
If neither all-instance nor vpn-instance is specified, this command removes the dynamic IGMP group
entries on the public network.
This command cannot remove static IGMP group entries.
Related commands: display igmp group.
Examples
# Remove the dynamic IGMP group entries on all interfaces on the public network.
<Sysname> reset igmp group all
# Remove the dynamic IGMP group entries on VLAN-interface 100 on the public network.
<Sysname> reset igmp group interface vlan-interface 100 all
# Remove the dynamic IGMP group entry for the IGMP group 225.0.0.1 on VLAN-interface 100 on the
public network.
<Sysname> reset igmp group interface vlan-interface 100 225.0.0.1

reset igmp group port-info

Syntax
reset igmp group port-info { all | group-address } [ vlan vlan-id ]
View
User view
104