Display Port-Group Manual - HP A5830 Series Command Reference Manual

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display information about loopback detection.
<Sysname> display loopback-detection
Loopback detection is running.
Detection interval is 30 seconds.
No port is detected with loopback.
Table 10 Command output
Field
Detection interval time is 30 seconds.
No port is detected with loopback.

display port-group manual

Description
Use the display port-group manual command to display information about port groups.
If the all parameter is specified, this command displays the name and member Ethernet interfaces of each
port group on the switch.
If a port group is specified, this command displays its name and member Ethernet interfaces.
If you do not specify the all parameter or any port group name, the command displays the name of each
port group on the switch.
Syntax
display port-group manual [ all | name port-group-name ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
2: System level
Parameters
all: Displays information about all port groups.
name port-group-name: Specifies the name of a port group, a string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Loopback detection interval is 30 seconds
No loops are detected on ports
27