Configuring A Large Scale Ipv6 Mbgp Network; Configuring An Ipv6 Mbgp Peer Group; Configuring Ipv6 Mbgp Community - HP 6125G Configuration Manual

Ip multicast configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Configuring a large scale IPv6 MBGP network

Before you configure the following tasks, you must configure basic IPv6 MBGP functions.

Configuring an IPv6 MBGP peer group

For easy management and configuration, you can organize some IPv6 MBGP peers that have the same
route update policy into a peer group. A policy configured for a peer group applies to all the members
in the group.
To create an IPv6 MBGP peer group, you must enable an existing IPv6 unicast peer group in IPv6 MBGP
address family view.
Before adding an IPv6 MBGP peer to the IPv6 MBGP peer group, you must add the corresponding IPv6
BGP unicast peer to the corresponding IPv6 BGP unicast peer group.
To configure an IPv6 MBGP peer group:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 address family
view.
4.
Create an IPv6 BGP peer
group.
5.
Add a peer to the peer group.
6.
Enter IPv6 MBGP address
family view.
7.
Enable the configured IPv6
unicast BGP peer group to
create the IPv6 MBGP peer
group.
Add the IPv6 MBGP peer into
8.
the peer group.

Configuring IPv6 MBGP community

A peer group enables a group of peers to share the same policy, and a community enables a group of
IPv6 MBGP routers in multiple ASs to share the same policy. The COMMUNITY attribute is propagated
among IPv6 MBGP peers and not restricted to AS boundaries.
You can reference a routing policy to modify the COMMUNITY attribute for routes sent to a peer. In
addition, you can define extended community attributes as required.
For more information about routing policy configuration, see Layer 3—IP Routing Configuration Guide.
To advertise the COMMUNITY attribute to an IPv6 MBGP peer or a peer group:
Command
system-view
bgp as-number
ipv6-family
group ipv6-group-name [ external
| internal ]
peer ipv6-address group
ipv6-group-name [ as-number
as-number ]
ipv6-family multicast
peer ipv6-group-name enable
peer ipv6-address group
ipv6-group-name
357
Remarks
N/A
N/A
N/A
N/A
By default, no peer is added.
N/A
N/A
By default, no peer is added.

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents