Ipv6 Multicast Routing And Forwarding Commands; Display Ipv6 Multicast Boundary - HP 6125XLG Command Reference Manual

IPv6 multicast routing and forwarding
commands

display ipv6 multicast boundary

Use display ipv6 multicast boundary to display IPv6 multicast boundary information.
Syntax
display ipv6 multicast boundary { group [ ipv6-group-address [ prefix-length ] ] | scope [ scope-id ] }
[ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group: Displays the IPv6 multicast boundary information for the specified group.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal number from 0 through F. If this argument is not specified, this command
displays the IPv6 multicast boundary information of all IPv6 multicast groups.
prefix-length: Specifies address prefix length, in the range of 8 to 128. The default is 128.
scope: Displays the IPv6 multicast group boundary information in the admin-scoped zone.
scope-id: Specifies the ID of an admin-scoped zone, in the range of 3 to 15, which is identified by the
scope field in the IPv6 multicast group address. If this argument is not specified, this command displays
the IPv6 multicast boundary information of all IPv6 admin-scoped zones.
interface interface-type interface-number: Specifies an interface. The argument interface-type
interface-number specifies the type and number of this interface. If this option is not specified, this
command displays IPv6 multicast boundary information on all interfaces.
Examples
# Display the IPv6 multicast boundary information of all IPv6 multicast groups on all interfaces.
<Sysname> display ipv6 multicast boundary group
Boundary
FF1E::/64
# Display the IPv6 multicast boundary information in all IPv6 admin-scoped zones on all interfaces.
<Sysname> display ipv6 multicast boundary scope
Boundary
3
Interface
Vlan-interface1
124
Interface
Vlan1