Archive Configuration Interval - HP Enterprise FlexFabric 12900E Series Command Reference Manual

archive configuration interval

Use
archive configuration interval
and set the archiving interval.
Use
undo archive configuration interval
archiving.
Syntax
archive configuration interval interval
undo archive configuration interval
Default
The automatic running-configuration archiving feature is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the interval for automatically saving the running configuration. The value
interval
range is 10 to 525600, in minutes.
Usage guidelines
Automatic configuration archiving enables the system to periodically save the running configuration
to the archive directory. After the system finishes an automatic archive, it resets the archiving interval
timer.
Before enabling automatic configuration archiving, you must use one of the following methods to
specify a directory and a name prefix for the configuration archives:
•
For local archiving, use the
local configuration archive directory and a name prefix.
•
For remote archiving, use the
configuration archive directory and a name prefix on a remote SCP server. In addition, you must
use the
server password
server.
If local archiving is configured, automatic configuration archiving saves the running configuration
only on the active MPU.
Examples
# Set the system to archive the running configuration every 60 minutes.
<Sysname> system-view
[Sysname] archive configuration interval 60
Archive file will be saved every 60 minutes.
Related commands
archive configuration
archive configuration location
archive configuration max
archive configuration server
archive configuration location
archive configuration server user
commands to configure a username and password for accessing the
to enable automatic running-configuration archiving
to disable automatic running-configuration
archive configuration server
153
command to specify a
command to specify a
and
archive configuration