Mld Last-Listener-Query-Interval; Mld Max-Response-Time - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
mld last-listener-query-interval
Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
View
Interface view
Default level
2: System level
Parameters
interval: Specifies an MLD last listener query interval in seconds, in the range of 1 to 5.
Description
Use mld last-listener-query-interval to configure the MLD last listener query interval on the current
interface.
Use undo mld last-listener-query-interval to restore the default.
By default, the MLD last listener query interval is 1 second.
Related commands: display mld interface, last-listener-query-interval, and mld robust-count.
Examples
# Set the MLD last listener query interval to 3 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld last-listener-query-interval 3
mld max-response-time
Syntax
mld max-response-time interval
undo mld max-response-time
View
Interface view
Default level
2: System level
Parameters
interval: Specifies the maximum response delay for MLD general query messages in seconds, in the
range of 1 to 25.
Description
Use mld max-response-time to configure the maximum response delay for MLD general query messages
on the interface.
Use undo mld max-response-time to restore the default.
334
Advertisement
Table of Contents
