Display Mld-Snooping Static-Group - HP 5900 Series Command Reference Manual

Field
(00:01:30)
Related commands
reset mld-snooping router-port

display mld-snooping static-group

Use display mld-snooping static
Syntax
display mld-snooping static
[ verbose ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6 multicast group, the
command displays static MLD snooping forwarding entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays static MLD snooping forwarding entries for all IPv6 multicast
sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays static MLD snooping forwarding entries for all VLANs.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays static MLD snooping forwarding entries on the
master device.
Examples
# Display detailed information about the static MLD snooping forwarding entries for VLAN 2.
<Sysname> display mld-snooping static-group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Attribute: local port
Description
Remaining aging time for the dynamic router port.
•
For a global port, this field is always displayed.
•
For a non-global port, this field is displayed if the port is on the master device.
Otherwise, you must specify the slot slot-number option to display this field.
group to display static MLD snooping forwarding entries.
-
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ]
-
202