Graceful-Restart Interval (Ospf View); Host-Advertise - HP 6125G Command Reference Manual

[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
[Sysname-ospf-1] enable out-of-band-resynchronization
[Sysname-ospf-1] graceful-restart help 2001

graceful-restart interval (OSPF view)

Syntax
graceful-restart interval interval-value
undo graceful-restart interval
View
OSPF view
Default level
2: System level
Parameters
interval-value: Specifies the Graceful Restart interval, in the range of 40 to 1,800 seconds.
Description
Use graceful-restart interval to configure the Graceful Restart interval.
Use undo graceful-restart interval to restore the default Graceful Restart interval.
By default, the Graceful Restart interval is 120 seconds.
The Graceful Restart interval of OSPF cannot be less than the maximum value of dead intervals on all
OSPF interfaces; otherwise, the Graceful Restart of OSPF may fail.
Related commands: ospf timer dead.
Examples
# Configure the Graceful Restart interval for OSPF process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] graceful-restart interval 100

host-advertise

Syntax
host-advertise ip-address cost
undo host-advertise ip-address
View
OSPF area view
Default level
2: System level
Parameters
ip-address: IP address of a host
96