Fujitsu F2MC-8FX Hardware Manual page 5

PREFACE
The Purpose and Intended Readership of This Manual
Thank you very much for your continued special support for Fujitsu semiconductor products.
The MB95170J series is a line of products developed as general-purpose products in the F
of proprietary 8-bit single-chip microcontrollers applicable as application-specific integrated circuits
(ASICs). The MB95170J series can be used for a wide range of applications from consumer products
including portable devices to industrial equipment.
Intended for engineers who actually develop products using the MB95170J series of microcontrollers, this
manual describes its functions, features, and operations. You should read through the manual.
For details on individual instructions, refer to the "F
Note: F
License
Purchase of Fujitsu I
components in an I
defined by Philips.
Sample Programs
Fujitsu provides sample programs free of charge to operate the peripheral resources of the F
family of microcontrollers. Feel free to use such sample programs to check the operational specifications
and usages of Fujitsu microcontrollers.
Microcontroller support information:
http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
* Note that sample programs are subject to change without notice. As these pieces of software are offered
to show standard operations and usages, evaluate them sufficiently before use with your system. Fujitsu
assumes no liability for any damages whatsoever arising out of the use of sample programs.
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
2
C components conveys a license under the Philips I
2
C system provided that the system conforms to the I
2
MC-8FX Programming Manual".
i
2
MC-FX series
2
C Patent Rights to use, these
2
C Standard Specification as
2
MC-8FX