19.2
Configuration of Interrupt Pin Selection Circuit
Figure 19.2-1 shows the block diagram of the interrupt pin selection circuit.
Block Diagram of Interrupt Pin Selection Circuit
To each peripheral function
INT01
Pin
INT00
Pin
TRG0/ADTG
Pin
UCK0
Pin
UI0
Pin
EC0
Pin
SCK
Pin
SI
Pin
• WICR register (interrupt pin selection circuit control register)
This register is used to determine which of the available peripheral input pins should be outputted to the
interrupt circuit and which interrupt pins they should serve as.
• Selection circuit
This circuit outputs the input from the pin selected by the WICR register to the INT00 input of the
external interrupt circuit (channel 0).
Figure 19.2-1 Block Diagram of Interrupt Pin Selection Circuit
Interrupt pin selection circuit
Selection circuit
CHAPTER 19 INTERRUPT PIN SELECTION CIRCUIT
WICR register
External
interrupt
circuit
INT01
INT00
(Unit 0)
319