Table of Contents
Advertisement
Communication in SIMATIC S7-300/1200/1500
11.4 Hardware configuration of the electronic weighing system
Figure 11-2
Start address of module in TIA Portal
Diagnostics interrupts can be optionally enabled or deactivated in the module properties. The
configuration scope for diagnostics and hardware interrupts depends on the SIMATIC CPU
used (S7-300, S7-400, S7-1200 or S7-1500) → Diagnostics interrupts (Page 105) and
Hardware interrupts (Page 105)
Figure 11-3
Configuration of interrupts in TIA Portal
Figure 11-4
HW ID of module in TIA Portal
98
SIWAREX WP321
Manual, 07/2014, A5E33715669A-02
Advertisement
Table of Contents
