NOTE
Antennas are included in the SKUs with an antenna facade but must be
ordered separately for the other SKUs and are not included.
Antennas are included with the SKUs listing an antenna facade, but must be
ordered separately for the other SKUs and are not included:
Dual Band 2.4 GHz / 5 GHz Antenna - US and Canada
Part Number
ML-2452-HPAG4A6-01
ML-2452-HPA6X6-036
ML-2452-HPA6-01
ML-2452-PNA5-01R
ML-2452-PNL3M3-1
AP-7562-670042-US
AP-7562-670042-WR
Single Band 2.4 GHz Antennas - US and Canada
Part Number
ML-2499-FHPA5-01R
ML-2499-HPA4-01
ML-2499-5PNL-72-N
Single Band 5 GHz Antenna - US and Canada
Part Number
ML-5299-HPA5-01
Outdoor Elevation Gain Configuration for US SKUs
Per FCC requirement, the use of the Access Point on UNII-1 band requires installers to input
antenna elevation gain for dipole antennas during configuration. This information can be
found in the Extreme Networks Antenna Specification Guide available at http://
documentation.extremenetworks.com.
AP-7562 Installation Guide
Antenna Type
Dipole
Dipole
Dipole
Panel
Polarized Panel
Dipole
Dipole
Antenna Type
Dipole
Dipole
Panel
Antenna Type
Dipole
2.4 GHz Peak
5.2 GHz Peak
Gain
Gain
4.0
7.3
4.0
7.3
5.3
6.1
5.5
6.0
9.7
9.2
4.8
6.4
4.8
6.4
2.4 GHz Peak Gain
5.3
4.5
6.5
5.2 GHz Peak Gain
5.6
Introduction
5