Information About Displays - Cisco TelePresence SX10 Quick Set Administrator's Manual

Hide thumbs Also See for TelePresence SX10 Quick Set:
Table of Contents

Advertisement

Cisco TelePresence SX10 Quick Set
Introduction

Information about displays

Real-time communication requirements
We have put in a lot of effort to minimize the camera to screen
delay on our video systems, and also to detect and compensate
for total delay between the audio and video components.
We recommend that you use displays with low delay to increase
the naturalness of communications. We also recommend that you
test a sample before ordering a large number of displays.
Delay through most displays is often very high (>100 ms) and is
therefore detrimental to real-time communication quality.
The following display settings may reduce the delay:
Activate Game mode, PC mode or similar modes that are
designed to reduce the response time and normally also the
delay
Deactivate motion smoothing, like Motion Flow, Natural Motion,
or any other video processing that introduces additional delay
Deactivate advanced audio processing, like Virtual Surround
effects and Dynamic Compression, which will make any
acoustic echo canceller malfunction
Change to a different HDMI input
Consumer Electronics Control (CEC)
The active video input on a display is sometimes changed by a
user. The video input that is active is set from the manufacturer's
user interface.
When you make a call the video system detects if the active video
input on the display has been switched to another input. The
video system then switches the input back so the video system is
the active video input source.
If the video system goes into standby without being the active
input source, the display will not be set to standby.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration
Peripherals
Peripherals
Cisco recommended displays
Cisco recommends using the following displays for the best experience and verified compatibility. The list
of displays is subject to change, check the CE9 Software Release Notes for updates.
Model
49" UHD (49UH5C)
55" UHD (55UH5C)
65" UHD (65UH5C)
75" UHD (75UH5C)
86" UHD (86UH5C)
98" UHD (98UH5C)
Model
QMN Series (43", 49", 55", 65", 75")
QMH Series (49", 55", 65")
QBN Series (43", 49", 55", 65", 75")
QBH Series (65" , 75")
Maintenance
LG global website link
http://www.lg.com/global/business/information-display/digital-signage/lg-49UH5C
http://www.lg.com/global/business/information-display/digital-signage/lg-55UH5C
http://www.lg.com/global/business/information-display/digital-signage/lg-65UH5C
http://www.lg.com/global/business/information-display/digital-signage/lg-75UH5C
http://www.lg.com/global/business/information-display/digital-signage/lg-86UH5C
http://www.lg.com/global/business/information-display/digital-signage/lg-98LS95D
Samsung global website link
https://displaysolutions.samsung.com/digital-signage/detail/1269/QM43N
https://displaysolutions.samsung.com/digital-signage/detail/1144/QM49H
https://displaysolutions.samsung.com/digital-signage/detail/1274/QB43N
https://displaysolutions.samsung.com/digital-signage/detail/1205/QB65H
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
65
Administrator Guide
System settings
Appendices

Advertisement

Table of Contents
loading

Table of Contents