Cameras Settings; Cameras Camera [N] Backlight Defaultmode; Cameras Camera [N] Brightness Defaultlevel; Cameras Camera [N] Brightness Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Cameras settings

Cameras Camera [n] Backlight DefaultMode

n: 1..1
This configuration turns backlight compensation on or off. Backlight compensation is
useful when there is much light behind the persons in the room. Without compensation the
persons will easily appear very dark to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/On
Off: Turn off the camera backlight compensation.
On: Turn on the camera backlight compensation.

Cameras Camera [n] Brightness Mode

n: 1..1
Define the camera brightness mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Manual
Auto: The camera brightness is automatically set by the device.
Manual: Enable manual control of the camera brightness. The brightness level is set
using the Cameras Camera [n] Brightness DefaultLevel setting.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

Cameras Camera [n] Brightness DefaultLevel

n: 1..1
Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 20
Value space: Integer (1..31)
The brightness level.

Cameras Camera [n] Flip

n: 1..1
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
110
Administrator Guide
Device settings Device settings Appendices