Xcommand Macros Runtime Stop; Message Commands; Xcommand Message Send - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Macros Runtime Stop

Stops all of the macros set up on this device.
Requires user role: ADMIN
USAGE:
xCommand Macros Runtime Stop
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

Message commands

xCommand Message Send

Triggers a Message Send event which sends text to any listening clients.
Requires user role: ADMIN, INTEGRATOR
USAGE:
xCommand Message Send Text: "Text"
where
Text: String (0..255)
The text that the message contains.
137
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.