Cfgremove - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

cfgRemove

Remove a member from a zone configuration.
Synopsis
cfgRemove "cfgName","member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove one or more members from an existing zone
configuration.
The member list is located by an exact string match, therefore, it is important to
maintain the order when removing multiple members. For example, if a zone
configuration contains "zone2; zone3; zone4" then removing "zone3; zone4"
succeeds, but removing "zone4; zone3" fails.
If all members are removed, the zone configuration is deleted.
For V4.1.x, this command changes the Defined Configuration. For the change to
be preserved across switch reboots, it must be saved to non-volatile memory using
the cfgsave command. For the change to become effective, an appropriate
zone configuration must be enabled using the cfgenable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
cfgRemove
109