Switchstart - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

switchStart

Initialize the switch to operational.
Synopsis
switchStart
Availability
Admin
Release
V4.1.x
Description
This command initializes a logical switch without disrupting the other switch in
the StorageWorks Core switch chassis. This command enables a logical switch in
a StorageWorks Core switch without disturbing the software state of the system in
general.
This command has to be used in combination with switchShutdown.
This command starts all the daemons associated with the switch, initializes the
object states associated with the switch to a clear state, and enables all the
ports/blades associated with the switch.
Note:
Operands
None.
826
This command is not supported on non-blade systems.
Fabric OS Version 3.1.x/4.1.x Reference Guide