Fabric OS Commands
portcamshow
Displays port based filter CAM utilization.
Synopsis: V3.1.x
portcamshow [portnumber]
Synopsis: V4.1.x
portcamshow [slotnumber/][portnumber]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to display the current filter CAM utilization of all ports or one
port specified at input.
The following information is displayed:
SID used
DID used
SID entries
DID entries
SID Free
DID Free
530
Displays the total number of CAM entries used by this port. Please
note that each CAM entry (either SID or DID CAM) can be shared
among ports in the same quad.
Displays the total number of CAM entries used by this port. Please
note that each CAM entry (either SID or DID CAM) can be shared
among ports in the same quad.
Displays all existing Source ID entries within the CAM per quad.
Please note that each CAM entry (either SID or DID CAM) can be
shared among ports in the same quad.
Displays all existing Destination ID entries within the CAM per
quad. Please note that each CAM entry (either SID or DID CAM)
can be among ports in the same quad.
Displays the total number of free SID CAM entries per quad.
Displays the total number of free DID CAM entries per quad.
Fabric OS Version 3.1.x/4.1.x Reference Guide