Perfdeleemonitor - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

perfDelEEMonitor

Delete an end-to-end monitor on port.
Synopsis: V3.1.x
perfDelEEMonitor portnumber[, monitorId]
Synopsis: V4.1.x
perfDelEEMonitor [slotnumber/]portnumber[, monitorId]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete an End-to-End monitor on a port.
After a successful execution of this command, a message displays confirming that
this monitor has successfully been deleted. Prior to issuing this command, verify
all the valid end-to-end monitor numbers on a specific port using the
perfshowfiltermonitor command to make sure that the right monitor is
deleted.
Note:
504
This command requires an Advanced Performance Monitoring license.
Fabric OS Version 3.1.x/4.1.x Reference Guide