Configdefault - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

configDefault

Reset a subset of configuration settings to the default values.
Synopsis
configDefault
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to reset certain configuration settings to the default values.
All configuration parameters, with the following exceptions, are reset to default
values:
Note:
configuration parameters.
The configDefault command may not be executed on an enabled switch. You
must first disable the switch using the switchDisable command.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Ethernet MAC address, IP address, and subnetmask
IP gateway address
License keys
OEM customization
SNMP configuration
System name
World Wide Name
Advanced Zoning configuration
See the configure command for more information on default values for
configDefault
139