Fcc-5 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
FCC-6
Error Message
FCC_LC Messages
This section contains the Fibre Channel Congestion Control line card (FCC_LC) messages.
FCC_LC-2
Error Message FCC_LC-2-ERROR_SENDING_HEART_BEAT: Error sending heart beat [dec].
Error Message FCC_LC-2-EXITING: Exiting fcc_lc: [chars].
Error Message
millisecs.
OL-15956-01
Introduced Cisco MDS SAN-OS Release 1.3(4a).
FCC-5-STARTING: FCC process started.
The Fibre Channel Congestion Control process started successfully.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCC-6-PRIO_UPDATE: Updated enable priority to [dec].
The Fibre Channel Congestion Control process is active for packets with priority greater
Explanation
than or equal to the threshold shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation Fibre Channel Congestion Control line card (FCC_LC) had an error sending a heartbeat.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Explanation Fibre Channel Congestion Control line card (FCC_LC) is exiting.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
FCC_LC-2-HEART_BEAT_NOT_SENT: Heart beat not sent for [dec]
Fibre Channel Congestion Control line card (FCC_LC) has not sent a heartbeat.
Explanation
No action is required.
Recommended Action
Cisco MDS 9000 Family System Messages Reference
2-67