Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 48
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
for opCode: [dec].
Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed to get route for VSAN:
[dec], Rewrite: [chars] DID: [chars] DID MASK: [chars], error: [hex].
Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for
interface : [chars].
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_FAILED: [chars] read from hardware
TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error:
[chars]).
Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_WRITE_FAILED: [chars] write to hardware
TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error:
[chars]).
Cisco MDS 9000 Family System Messages Reference
2-12
ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed
The messaging and transaction service (MTS) registration failed for the reason shown
Explanation
in the error message.
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
The ACLTCAM process experienced a failure while getting a route for the VSAN.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
The access control list TCAM hardware resource is full.
Explanation
Recommended Action
No action is required.
Cisco MDS SAN-OS Release 3.1(1).
Introduced
A read from the TCAM failed. The error message shows the ASIC and TCAM
Explanation
associated with this failure and shows the TCAM address, number of entries, and the error that
occurred.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release1.2(2a).
Introduced
A write to the TCAM failed. The error message shows the ASIC and TCAM associated
Explanation
with this failure and shows the TCAM address, number of entries, and the error that occurred.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
