Vsan Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

VSAN Messages

This section contains the virtual SAN (VSAN) messages.
VSAN-2
Error Message
VSAN-3
Error Message VSAN-3-CFS_OPERATION_FAILED: cfs [chars] operation failed : [chars].
Error Message
Error Message
sent by addr [dec]:[dec].
OL-15956-01
VSAN-2-PROGRAM_EXIT: process exiting with reason: [chars].
The Virtual SAN (VSAN) manager process is exiting with the reason shown in the error
Explanation
message.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation The Cisco Fabric Services (CFS) operation has failed.
Check the reason for the failure of the CFS operation and rectify the problem.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
VSAN-3-MEM_ALLOC_FAILED: alloc failed for size:[dec].
Memory allocation failed.
Explanation
Recommended Action Enter the show process memory CLI command or use a similar Fabric
Manager/Device Manager procedure to see memory usage for processes.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VSAN-3-MESSAGE_ERROR: could not handle message:[chars] of type [dec]
Received an interprocess communications IPC message sent by a component running
Explanation
on the node and SAP shown in the error message.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-447