Fcs-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
[dec] in VSAN [dec].
Error Message
Error Message
Error Message
Cisco MDS 9000 Family System Messages Reference
2-102
FCS-3-NO_MTS_RESP: [chars].
There was no response to a messaging and transaction service (MTS) request. The error
Explanation
message indicates details of the messaging and transaction service (MTS) message.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCS-3-NO_REMOTE_RESP: No response for request [chars] from domain
There was no response to an FC2 request. The error message indicates Fabric
Explanation
Configuration Server (FCS) request, remote domain, and VSAN ID.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCS-3-OTHER_ERR: [chars].
A Fabric Configuration Server (FCS) generic error occurred. The error message
Explanation
indicates the description of the error.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCS-3-PSS_ERR: [chars].
An error occurred during a Fabric Configuration Server (FCS) persistent storage
Explanation
service (PSS) operation. The error message indicates the PSS operation that caused the error.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCS-3-SOCK_ERR: sd: [dec], [chars].
Explanation An FC-2 socket error occurred on socket-id (sd) listed in the error message. The error
message indicates the reason for failure.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01