Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 443

Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware
CRC checksum procedure encountered an error during initialization on module [dec]
Reason: [chars].
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_INTERN_ERRORS: Compact Flash firmware
CRC checksum procedure cannot proceed due to internal errors on module [dec].
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_RECALLED: Compact Flash on module [dec] is
healthy at this time. But this has been identified a recalled part. Please replace
it soon since it can go bad anytime.
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_UNRESPONSIVE: Recalled Compact Flash on
module [dec] is unresponsive.
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_REFLASH_INTERN_ERRORS: Compact Flash
firmware re-flash procedure cannot proceed due to internal errors on module [dec].
OL-15956-01
Explanation
Compact Flash CRC checksum initializations failed.
Check the compact flash on the board and any relevant system(mis)
Recommended Action
configurations.
Cisco MDS SAN-OS Release 3.1(3).
Introduced
Compact Flash CRC checksum procedure was terminated due to internal errors.
Explanation
Restarting the cf-crc-check using system health clear-errors module <x>
Recommended Action
cf-crc-check. If the condition persists, schedule a downtime and replace the compact flash on the
affected module.
Cisco MDS SAN-OS Release 3.1(3).
Introduced
Compact Flash model has data retention issues and needs to be replaced.
Explanation
Recommended Action
Schedule a downtime and replace the compact flash on the affected module.
Introduced
Cisco MDS SAN-OS Release 3.1(3).
The compact flash model has data retention issues and needs to be replaced.
Explanation
Schedule a downtime and replace the compact flash on the affected module.
Recommended Action
Cisco MDS SAN-OS Release 3.1(3).
Introduced
Compact Flash firmware reflash procedure terminated due to internal errors.
Explanation
Restarting the test using system health clear-errors module <x> cf-re-flash. If
Recommended Action
the condition persists, schedule a downtime and replace the compact flash on the affected module.
Cisco MDS SAN-OS Release 3.3(1a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-407

Advertisement

Table of Contents
loading

Table of Contents