Sme_Cpp-4; Sme_Cpp-5 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SME_CPP-5-SME_ENABLED: SME Enabled.
SME_CPP-SLOT#-2
Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_ITL_MISCONFIG: Different physical LUNs
under same Tape Device - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars]
LUN Id:%Ld Serial Num:[chars] Serial Num:[chars].
Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_LUN_MISCONFIG: Different physical LUNs
under same ITL - Old Serial Num:[chars] New Serial Num:[chars].
SME_CPP-SLOT#-3
Error Message SME_CPP-SLOT#-3-LOG_ERR_SME_DISK_TAPE_MISCONFIG: A disk misconfigured
under tape config - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars] LUN
Id:%Ld.
Cisco MDS 9000 Family System Messages Reference
2-310
Introduced Cisco MDS SAN-OS Release 3.2(2).
SME service is enabled.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Different physical Logical unit numbers are on the same tape device.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Different physical Logical unit numbers are on the same ITL.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Explanation A disk is misconfigured in the tape configuration.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(2).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01