Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 412

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
([dec]).
Error Message
since its coming up as active when local sup is still active.
Error Message
standby on the redundancy channel not working for last [dec] minutes.
Error Message
Error Message SYSMGR-2-RESTORE_RUNTIME_DB_FAILED: Restoring of runtime database for
fabric switch upgrade
Cisco MDS 9000 Family System Messages Reference
2-376
SYSMGR-2-REDSTATE_SETFAILED: Failed to set redundancy state: ret_val
The local supervisor is unable to get the redundancy state.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-2-REDUNDANCY_CHANNEL_FAILURE: Remote sup will be rebooted
Remote supervisor is becoming active although local supervisor is still active. As a
Explanation
result, the local supervisor will cause the remote supervisor to reset itself.
If the problem persists, contact customer support. If you purchased Cisco
Recommended Action
support through a Cisco reseller, contact the reseller directly. If you purchased support directly from
Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-2-REDUNDANCY_HEARTBEAT_FAILURE: Heartbeat between active and
This supervisor is not receiving a heartbeat on the redundancy channel from the other
Explanation
supervisor. This can result in problems during switchover and switchover may fail.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-2-RESTART_SYSTEM_LOG: We will be restarting system soon.
The system will restart because it was trying to do a hot switchover before all the state
Explanation
was transferred to this supervisor. A cold switchover has begun.
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation The runtime database cannot be restored during the boot process for the fabric switch
upgrade.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
failed during boot (error-id [hex]).
OL-15956-01