Nasb Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
MODULE-6
Error Message MODULE-6-MOD_PURGE_CONFIG: Purging the configuration for module [dec].
Error Message MODULE-6-MOD_REG_OK: Registration succeeded for module [dec].
NASB Messages
This section contains the Network-Accelerated Serverless Backup (NASB) messages.
NASB-SLOT#-5
Error Message NASB-SLOT#-5-LOG_ERR_TPC_DPP_DEAD: VSAN :[dec] VT pWWN :[chars] DPP
died.
Error Message
VT Activate failed.
Error Message
VT and NPort creation FAILED !!!.
Cisco MDS 9000 Family System Messages Reference
2-204
Notification is sent to remove module configurations.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Module sent a successful registration message.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The data path processor (DPP) associated with the virtual target failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
NASB-SLOT#-5-LOG_ERR_TPC_VT_ACT_FAILED: VSAN :[dec] VT pWWN :[chars]
Explanation
The activate step for a virtual target failed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
NASB-SLOT#-5-LOG_ERR_TPC_VT_CREATE_FAIL: VSAN :[dec] VT pWWN :[chars]
The virtual target and N port creation failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
