Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 428

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
successful.
Error Message
by UUID [hex] (PID [dec]).
Error Message
will now start stateless.
Error Message SYSMGR-5-RUNTIME_DB_RESTORE_STARTED: Runtime database controller
started (PID [dec]).
Error Message SYSMGR-5-RUNTIME_DB_RESTORE_SUCCESS: Runtime database successfully
restored.
Cisco MDS 9000 Family System Messages Reference
2-392
Introduced Cisco MDS SAN-OS Release 1.3(1).
SYSMGR-5-PARTIAL_CFGWRITE_DONE: Partial configuration copy
The requested configuration copy has completed successfully.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-5-PARTIAL_CFGWRITE_STARTED: Partial configuration copy started
This message is printed only on active supervisor, and indicates that service with
Explanation
mentioned UUID has requested a partial write mem CLI command. The error message shows the
process ID of the process servicing the request.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-5-RECOVERY_FAILED: Stateful recovery failed, system manager
Stateful recovery failed; system manager will now restart system and start stateless.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
The system started the restoration of the runtime database. This happens during the
Explanation
nondisruptive fabric switch upgrade.
Recommended Action No action is required.
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
Explanation The runtime database was successfully restored for the nondisruptive fabric switch
upgrade.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01