Cfs Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message CERT_ENROLL-3-CERT_EN_FIPS_MODE_INIT_ERROR: Could not initialize FIPS
mode : [chars].
Error Message CERT_ENROLL-6-CERT_EN_MESSAGE: [chars].

CFS Messages

This section contains the Cisco Fabric Services (CFS) messages.
CFS-2
Error Message CFS-2-MTS_REJECT: Verification failed reject MTS message SAP
[dec]:RR-token [hex].
Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], reason
[chars].
Error Message CFS-2-EXITING: Exit reason: [chars].
OL-15956-01
FIPS mode initialization error.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Explanation The digital certificate enrollment process generated an informational message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
This MTS message could have been posted by the previous active running pre 3.x; MTS
Explanation
structure has changed since then hence ignore the MTS message, Source SAP [dec]; RR-token [hex].
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 3.2(1).
When Cisco Fabric Service (CFS) receives a malformed CFS packet from a switch with
Explanation
WWN and IP address shown in the error message, then CFS rejects the packet.
Recommended Action No action is required.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
The Cisco Fabric Services process has exited because of the error shown in the error
Explanation
message. The process will be restarted automatically.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Cisco MDS 9000 Family System Messages Reference
2-25