Tlport-6; Tp C Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message

TP C Messages

TPC stands for Third Party Copy. It is for the feature Network Accelerated Serverless Backup (NASB).
Error Message TPC-SLOT#-5-LOG_ERR_TPC_DPP_DEAD: VSAN :[dec] VT pWWN :[chars] DPP
died.
Error Message
VT Activate failed.
Error Message
VT and NPort creation FAILED !!!.
OL-15956-01
TLPORT-6-PORTDOWN: Translation Port [chars] DOWN.
A port configured as a TL port is down and out of operation. The error message shows
Explanation
the Interface-ID string that identifies the TL port. This is an informational message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
TLPORT-6-PORTUP: Translation Port [chars] UP.
A port configured as a TL port is up and operational. The error message shows the
Explanation
Interface-ID string that identifies the TL port. This is an informational message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The data path processor (DPP) associated with the virtual target has crashed.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
TPC-SLOT#-5-LOG_ERR_TPC_VT_ACT_FAILED: VSAN :[dec] VT pWWN :[chars]
Explanation The activate step for a virtual target has failed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
TPC-SLOT#-5-LOG_ERR_TPC_VT_CREATE_FAIL: VSAN :[dec] VT pWWN :[chars]
The virtual target and nport creation failed.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-419