Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 400

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
directory. Aborting configuration copy.
Error Message
configuration directory (error-id [hex]). Aborting configuration copy.
Error Message
configuration (error-id [hex]). Aborting configuration copy.
Error Message
(error-id [hex]). Aborting configuration copy.
Cisco MDS 9000 Family System Messages Reference
2-364
SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration
The destination location for the startup configuration could not be found.
Explanation
If the problem persists, issue the init system CLI command from the
Recommended Action
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-2-CFGWRITE_ABORTED_INIT: Unable to initialize the
Explanation An attempt to copy the running configuration to startup configuration has failed
because the old data could not be removed.
If the problem persists, issue the init system CLI command from the
Recommended Action
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Cisco MDS SAN-OS Release 1.3(1)
Introduced
SYSMGR-2-CFGWRITE_ABORTED_LABEL: Unable to label the new
Explanation An attempt to copy the running configuration to startup configuration has failed
because the new startup configuration could not be stamped.
If the problem persists, issue the init system CLI command from the
Recommended Action
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SYSMGR-2-CFGWRITE_ABORTED_LOCK: Unable to lock the configuration
An attempt to copy the running configuration to startup configuration has failed
Explanation
because the system could not lock the required configuration items.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01