Rib-0; Rib-1; Rib-2; Rib-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
Error Message
OL-15956-01
RIB-3-FIB_EXIT: fib exited.
The Forwarding Information Base (FIB) had exited and may not continue operation.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-3-MISS_APPS: Missing response from service.
Service not responding to the Routing Information Base (RIB).
Explanation
Enter the debug rib error command, or use a similar Fabric Manager
Recommended Action
procedure, then recreate the operation scenario to find out more details.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-3-NO_MEM: Out of memory.
Explanation
The Routing Information Base (RIB) does not have enough memory to continue proper
operation.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
RIB-3-SEND_FIB: Cannot talk to fib.
The Routing Information Base (RIB) to the Forwarding Information Base (FIB)
Explanation
interprocess communication (IPC) failure.
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-3-SEND_SNMP: Cannot respond to snmp.
The Routing Information Base (RIB) to SNMP interprocess communication failure.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-285
Advertisement
Table of Contents
