Flogi-5; Fspf Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars] with fcid [chars] logged IN.
Error Message
[chars] logged OUT.

FSPF Messages

This section contains the Fabric Shortest Path First (FSPF) messages.
FSPF-2
Error Message
Cisco MDS 9000 Family System Messages Reference
2-114
Introduced Cisco MDS SAN-OS Release 1.3(4a).
FLOGI-5-MSG_PORT_LOGGED_IN: [VSAN [dec], Interface [chars]] Nx Port
Nx port logged in with the specified information.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FLOGI-5-MSG_PORT_LOGGED_OUT: [VSAN [dec], Interface [chars]] Nx Port
Nx port logged out.
Explanation
Enter the show interface, show VSAN, or show module command (or use an
Recommended Action
equivalent Fabric Manager/Device Manager procedure) to help determine why this Nx port logged
out. You can alternatively use Fabric Manager and/or Device Manager instead of the command line
method.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FSPF-2-SHUTDOWN: Routing daemon shutting down : [chars].
Fabric Shortest Path First (FSPF) routing daemon is shutting down because of the
Explanation
reason shown in the error message.
This is a severe problem. Provide the reason shown and the log files for Fabric
Recommended Action
Shortest Path First (FSPF) to your customer service representative.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01